A “slice” is a type of golf shot in which the golf ball curves dramatically during a flight from left to right (for a right-handed golfer). The slice can be played intentionally, but it is usually the result of a mishap. Slices are the most common problem for recreation and high-handicap golfers. In this article, we will discuss the driver grip to fix a slice.
Driver Grip To Fix Slice: What Is The Cause Of A Slice?
At its root, a sliced shot is caused by the clubface arriving at the golf ball’s impact in an open position. This may be due to set-up or swing issues that cause the face to be open or to an outside-to-inside swing path that effectively opens the face by “wiping” or “swiping” across the golf ball, giving “slice spin.” (Slice spin is a clockwise swing for right-handed golfers, counter-clockwise for left-handed golfers.)
Driver Grip To Fix Slice: What Is Physics Behind The Golf Slice?
A slice is a golf shot that curves to the right (for right-handed golfers). It’s one of the most common mishaps for amateurs. A lot of golfers are struggling with a slice because they don’t understand the cause. Physics that makes a slice revolves around two things: the clubface and the swing path. If you understand the cause of a slice, you can focus on correcting it.
There are three different slices: a pull-in slice, a push-in slice, and a standard slice. The pull slice starts to the left of the target and rolls back to the right. A pull slice will end up the straightest of the three because it’s going to start left. The push-slice starts right from the target and cuts even further-it is the most damaging. A standard slice starts on the target line and then goes right.
The sliced shot has more backspin and sidespin than the shot that was hit properly. Having more backspin causes a slice to be much shorter than a hit shot. The sidespin causes the ball to bend to the right in the air and then bounce back and roll even further to the right when it hits the ground.
C. Physical Reasons
The standard part is caused by the open face of the club and the out-to-in swing path. They combine to create sidespin that causes the ball to go right. The more open the clubface, the more sides of the ball will be. The swing path determines the starting point for the slice. The more a golfer swings from the outside-in, the more the ball starts from the target’s left side before slicing to the right. A severe out-and-out swing path causes a pull slice. The push-slice is caused by an inside-to-out swing path with an open clubface.
The golfer has to square the clubface and swing on the correct path to fixing a slice. Closing more of your clubface during your swing is one way to correct that element. The golfer must also fix the downswing that comes over the top, causing the club to swing across the ball from the outside-to-the-way. Try closing your position and swinging along the line of your feet to make you feel the right swing path.
Driver Grip To Fix Slice: When To Slice
There are some instances where cutting can be beneficial. One would be playing a hole with a severe dogleg to the right. The controlled slice enables the ball to follow the design of the hole. You might want to hit a slice when your ball is in the woods, and you’ve got to bend the ball around the tree. In both cases, you want to swing on an out-and-out path with a slightly open clubface.
Driver Grip To Fix Slice: How To Fix The Slice In Five Minutes
There’s a good reason why people who cut the ball want to fix it: because on the road, you’re going to play good golf, there’s nowhere to be a slice of it. You can go from hitting a hook to playing good golf, but if you don’t learn how to stop hitting open clubface shots, you’re not going to get too far. The unfortunate reality is that the vast majority of players-maybe 90 per cent-are struggling with a piece of money.
They don’t have a good grip, they make a steep swing into the ball, and they don’t understand how the hands work in a good way. These things combine to produce high, weak shots to the right. One teaching strategy that has always worked for me is to figure out a student’s major flaw and devise a plan to practice the opposite of that flaw. Exaggerate the fix as much as you can; feel the change.
This is how a new slice drill was born. Slicers everywhere need an easy way to feel the right path and the right plane. My three-step drill will make you feel a radically different swing shape, starting by tracing backward circles in the air.
A. Get A Driver That’s Fit For The Job
You need to evaluate your equipment before you do your first practice swing. Almost all slicers use a driver with too little loft because they react to their high, weak ball flight. The new adjustable driver lets you increase the loft and move the weight to the clubhead’s heel. Instead of swinging a 9-degree driver and making it 10 or 11 degrees because you’re holding it open through impact, you want more loft so you can release your hands and turn a 10.5 driver into a 9.
B. Set Your Hands So They Can Release
Two grip errors make a slice almost inevitable. Many players use a grip that’s too weak—with thumbs pointing straight down the handle. Make your grip stronger, so your hands are turned away from the target, and your palms are parallel to each other. If you draw lines from your thumbs’ base, you should hit the point of your necklace on the right side of your shirt. Also, gripping too tight keeps your hands from releasing through impact. Take a soft grip on you.
Driver Grip To Fix Slice: 3-Part Preparation
Okay, you have the right club and the right grip. Our goal now is to replace the swing loop that you make-the pull-in-then-loop-over-the-top one-with a loop that goes in the opposite direction. It’s as easy as starting with a simple clockwise circle (from the player’s point of view).
Step 1: Draw And Backward Loop
Check your new grip, take your normal stance, with the ball just inside your front heel. But instead of sowing the clubhead, as usual, set it in front of the ball. Then make a slow circle with your hands, swing the club to the target, keep going over your head and down and over the ball (above). Just focus on the loop. As you swing, the club will naturally land on a shallower plane as it approaches the ball, and your hands will begin to loosen or rollover.
Step 2: Lift And Turn
The next step is to incorporate a body to turn into a drill and move the start of the loop from the ball’s front to your normal address position. Once you’ve grooved the clockwise circle’s motion (above), keep the loop going and add the turn of your shoulder. Start with the clubhead behind the ball and lift it over your head until your hands are in front of your face (A). Turn your shoulders back and feel the weight of the clubhead, keep it on the shallower plane you set (B), then swing over the ball (C). You make half a clockwise loop—from the position over your head to the ball—which keeps the club on the right inner path.
Step 3: Turn And Release
The final step of the process is the transition from a practice drill to a real golf swing. Lift the club to a two-thirds backswing position, with your left arm in front of your chest (A). Then make your full backswing turn (B) and graduate from swinging the ball to hitting the shots (C). You’re going to keep feeling the backward loop that you started in the first part of the drill, and you should immediately see a right-to-left ball flight. It works for any player, at any level of disability. Just take it slow, and do it in parts of it.
Don’t settle for a weak slice of iron and wood. Just because this was your miss doesn’t mean it’s going to have to be that way forever. You can begin to change your swing by switching to the right equipment and using these drills. If this miss has been plaguing your game for some time, understand that it might be overnight, but it’s completely fixable in the long run.
Once you learn to swing on the right path and square the clubface at impact, you’ll hit the ball further and straighter than ever before. Be sure to practice these tips on the range instead of trying to implement them mid-round. If you notice that the slice seems to worsen as the rounds go on, don’t be afraid to switch to 3 or 5 tea wood. The driver is the toughest club to square up, and clubbing down can help you keep your ball in play more often.